FIGURE 22
Attaching the adhesive feet to the device
2. Set the device on a flat surface near an AC power source, making sure there is the specified amount
of space on all sides of the device for proper airflow.
Mounting an external power supply in a rack (2-post)
DANGER
Make sure the rack housing the device is adequately secured to prevent it from becoming
unstable or falling over.
Complete the following steps to install an external power supply in a rack.
NOTE
The device shown in the illustration is an example and could be different from the one you are using.
The process for installation is the same.
1. Remove the rack mounting kit from the shipping carton. The kit contains two L-shaped mounting
brackets, eight sink-head mounting screws, four rack-mounting screws, and four cage nuts.
2. Using a Phillips screwdriver, attach the mounting brackets to the sides of the external power supply
using 4 sink-head screws on each side.
Mounting an external power supply in a rack (2-post)
Brocade ICX 7250 Switch Hardware Installation Guide
43
53-1003622-02