FIGURE 21
EPS4000 LEDs
1. Ex.y: Power status indicator (54 V), where x = EPS4000 connector (1-8), y = Channel or port (1-2)
2. CONFIG: EPS configuration mode indicator
3. Rx.y: Power status indicator (12 V), where x = EPS4000 connector (1-8), y = Channel or port (1-2)
The following table describes the functions of the EPS4000 LEDs.
System Status LEDs on the EPS4000
TABLE 9
LED
State
Description
E1.1 ~ E8.1 (54 V1)
E1.2 ~ E8.2 (54 V2)
Off
No connection
Green
EPS4000 is delivering up to 375 W PoE power to switch.
Amber
Switch is connected to this channel but EPS4000 doesn't have
sufficient PoE power for this channel.
Blinking amber
This channel had a fault (over current, etc.)
Blinking amber and
green
This channel has been granted PoE power but there is a fault on
the channel (over current, etc.)
R1.1 ~ R8.1 (12 V1)
R1.2 ~ R8.2 (12 V2)
Off
No connection
Green
Switch is connected to this channel and EPS is ready to provide
12 V backup power for this channel
Blinking green
Switch is connected to this channel and EPS is providing 12 V
backup power to this channel
Amber
Switch is connected to this channel but EPS doesn't have
sufficient 12 V backup power for this channel
Blinking amber
This channel had a fault (over current, etc.)
CONFIG
Green
Auto-configuration mode
Installing the EPS4000
38
Brocade ICX 7250 Switch Hardware Installation Guide
53-1003622-02