Brocade Communications Systems ICX 6430 series, Hardware Installation Manual, Page: 80 / 108

TABLE 14 Network connection-related LED states (continued)
LED Desired state Meaning Abnormal state Meaning or action
connectors on
page 89.
• Verify that the
port has not been
disabled through
a configuration
change.
• If the other
actions do not
resolve the
problem, try
using a different
port or a different
cable.
If a problem persists after taking these actions, contact Brocade Technical Support.
Tracing a route
To determine the path through which a Brocade device can reach another device, enter a command similar to the following at any level of
the CLI on the device.
device> traceroute 10.33.4.7
Syntax: traceroute host-ip-addr [ maxttl value ] [ minttl value ] [ numeric ] [ timeout value ] [ source-ip ip-addr ]
The CLI displays trace route information for each hop as soon as the information is received. Traceroute requests display all responses to
a given TTL. In addition, if there are multiple equal-cost routes to the destination, the Brocade device displays up to two responses by
default.
Testing connectivity
Brocade ICX 6430 and ICX 6450 Stackable Switches Hardware Installation Guide
80 Part Number: 53-1003617-03