manualshive.com logo in svg

Brocade Communications Systems ICX 6430 series, Hardware Installation Manual, Page: 26 / 108

Share
Download
Brocade Communications Systems ICX 6430 series Hardware Installation Manual Download Page 26

Summary of installation tasks

Follow the steps in the following table to install your device. Details for each of these steps are provided on the pages indicated.

TABLE 7 

Installation tasks 

Task number

Task

Where to find more information

1

Ensure that the physical environment that will
host the device has the proper cabling and
ventilation.

Preparing the installation site

 on page 27

2

Unpack the device and all included accessories.

Items included with the ICX 6430 and ICX
6450 devices

 on page 25

3

Install the device on a desktop, or in an
equipment rack.

Installing the device

 on page 28

4

Once the device is installed, plug the device into
a nearby power source that adheres to the
regulatory requirements outlined in this manual.

Powering on the system

 on page 48

Installation precautions

Follow all precautions when installing a device.

General precautions

DANGER

All fiber-optic interfaces use Class 1 lasers.

CAUTION
Do not install the device in an environment where the operating ambient temperature might exceed 40°C (104°F).

CAUTION
Never leave tools inside the chassis.

Lifting precautions

DANGER

Make sure the rack housing the device is adequately secured to prevent it from becoming unstable or falling over.

DANGER

Mount the devices you install in a rack as low as possible. Place the heaviest device at the bottom and progressively place
lighter devices above.

Summary of installation tasks

Brocade ICX 6430 and ICX 6450 Stackable Switches Hardware Installation Guide

26

Part Number: 53-1003617-03

Summary of Contents for ICX 6430 series













































































































Reviews:

No comments