manualshive.com logo in svg

Brocade Communications Systems ICX 6430 series, Hardware Installation Manual, Page: 3 / 108

Share
Download
Brocade Communications Systems ICX 6430 series Hardware Installation Manual Download Page 3

Contents

Preface...................................................................................................................................................................................................................................7

Document conventions............................................................................................................................................................................................................................7

Notes, cautions, and warnings.....................................................................................................................................................................................................7
Text formatting conventions......................................................................................................................................................................................................... 7
Command syntax conventions....................................................................................................................................................................................................8

Brocade resources.....................................................................................................................................................................................................................................8
Document feedback..................................................................................................................................................................................................................................8
Contacting Brocade Technical Support............................................................................................................................................................................................ 9

Brocade customers..........................................................................................................................................................................................................................9
Brocade OEM customers............................................................................................................................................................................................................. 9

About This Document..................................................................................................................................................................................................... 11

What’s new in this document............................................................................................................................................................................................................. 11
Supported Software............................................................................................................................................................................................................................... 11

ICX 6430 and ICX 6450 Overview.............................................................................................................................................................................. 13

Hardware features................................................................................................................................................................................................................................... 13

ICX 6430 models......................................................................................................................................................................................................................... 13
ICX 6450 models......................................................................................................................................................................................................................... 14

Network and management interfaces............................................................................................................................................................................................ 15

Console management interface ............................................................................................................................................................................................. 16
Out-of-band management interface.....................................................................................................................................................................................16
System reset button......................................................................................................................................................................................................................17
Network interfaces for ICX 6430 and ICX 6450 devices............................................................................................................................................17
Specifying a port address...........................................................................................................................................................................................................18

Port, system, and power status LEDs............................................................................................................................................................................................ 19
Power supplies......................................................................................................................................................................................................................................... 22

Power supply usage..................................................................................................................................................................................................................... 23

ICX 6430 and ICX 6450 Installation........................................................................................................................................................................... 25

Items included with the ICX 6430 and ICX 6450 devices...................................................................................................................................................25
Configuration requirements................................................................................................................................................................................................................ 25
Summary of installation tasks............................................................................................................................................................................................................26
Installation precautions......................................................................................................................................................................................................................... 26

General precautions......................................................................................................................................................................................................................26
Lifting precautions.........................................................................................................................................................................................................................26
Power precautions.........................................................................................................................................................................................................................27

Preparing the installation site..............................................................................................................................................................................................................27

Cabling infrastructure................................................................................................................................................................................................................... 27
Installation location........................................................................................................................................................................................................................27
Rack-mount installation considerations............................................................................................................................................................................... 28

Installing the device................................................................................................................................................................................................................................ 28

Desktop installation.......................................................................................................................................................................................................................28
Rack mount installation............................................................................................................................................................................................................... 29
Wall mount installation.................................................................................................................................................................................................................32

Connecting devices in a traditional stack...................................................................................................................................................................................... 34

Stacking ports and trunks...........................................................................................................................................................................................................35
Stacking configuration requirements.....................................................................................................................................................................................36

Brocade ICX 6430 and ICX 6450 Stackable Switches Hardware Installation Guide

Part Number: 53-1003617-03

3

Summary of Contents for ICX 6430 series













































































































Reviews:

No comments