manualshive.com logo in svg

Brocade Communications Systems ICX 6430 series, Hardware Installation Manual, Page: 29 / 108

Share
Download
Brocade Communications Systems ICX 6430 series Hardware Installation Manual Download Page 29

FIGURE 21 

Attaching the adhesive feet

1. Attach the four adhesive feet to the bottom of the device. If installing multiple devices, attach the adhesive feet to each device.
2. Set the device on a flat desktop, table, or shelf near an AC power source. Make sure that adequate ventilation is provided for the

system. A 7.62 cm (3 in) clearance is recommended on each side.

3. If installing a single device only, go to the “Powering on the system” task. If installing multiple devices place each device squarely

on top of the one below.

Rack mount installation

The devices use stationary mounting when mounted in a rack.

DANGER

Make sure the rack housing the device is adequately secured to prevent it from becoming unstable or falling over.

NOTE

You need a #2 Phillips screwdriver for rack mount installation.

Complete the following steps to mount devices in a rack.

1. Remove the rack mounting kit from the shipping carton. The kit contains two L-shaped mounting brackets and six sink-head

screws.

Installing the device

Brocade ICX 6430 and ICX 6450 Stackable Switches Hardware Installation Guide

Part Number: 53-1003617-03

29

Summary of Contents for ICX 6430 series













































































































Reviews:

No comments