manualshive.com logo in svg

Brocade Communications Systems ICX 6430 series, Hardware Installation Manual, Page: 22 / 108

Share
Download
Brocade Communications Systems ICX 6430 series Hardware Installation Manual Download Page 22

1. Power status LEDs

TABLE 4 

Power status LED on ICX 6430 and ICX 6450 devices

LED

Condition

Status

Internal power status

Off

No input power

Green (steady)

Internal Power Supply Unit (PSU) is working
normally.

Yellow (steady)

Internal PSU failed, power is provided by EPS.

Power supplies

ICX 6430 and ICX 6450 devices have one standard power supply receptacle on the rear panel of the device for the AC power cord. The
connector labeled "EPS" is for the optional external power supply cord that can provide power to the device in the event the internal
power supply fails.

FIGURE 20 

ICX 6430-48 power supply connectors

1

AC power supply socket

2

External power supply (EPS) connector

TABLE 5 

EPS connectors on the ICX 6430 and ICX 6450 models

Model

EPS connectors

ICX 6430-24

0

ICX 6430-24P

1

Power supplies

Brocade ICX 6430 and ICX 6450 Stackable Switches Hardware Installation Guide

22

Part Number: 53-1003617-03

Summary of Contents for ICX 6430 series













































































































Reviews:

No comments