manualshive.com logo in svg

Brocade Communications Systems ICX 6430 series, Hardware Installation Manual, Page: 52 / 108

Share
Download
Brocade Communications Systems ICX 6430 series Hardware Installation Manual Download Page 52

FIGURE 42 

ICX 6400-EPS1500 LEDs

1. EPS LED

2. FAN LED

The following table describes the functions of the ICX 6400-EPS1500 LEDs.

TABLE 11 

System Status LEDs on the ICX 6400-EPS1500

LED

Condition

Status

EPS 1

Green

The power supply is operating normally. The
port is providing power to the connected device
at 12 V and 54 V of power.

Red

The port is not delivering power to the device.
Power failure at 12 V and 54 V of power.

EPS 2

Green

The power supply is operating normally. The
port is providing power to the connected device
at 12 V and 54 V of power.

Red

The port is not delivering power to the device.
Power failure at 12 V and 54 V of power.

EPS 3

Green

The power supply is operating normally. The
port is providing power to the connected device
at 12 V and 54 V of power.

Red

The port is not delivering power to the device.
Power failure at 12 V and 54 V of power.

FAN 1

Green

The cooling fan is operating normally.

Amber

The cooling fan has failed.

FAN 2

Green

The cooling fan is operating normally.

Amber

The cooling fan has failed.

FAN 3

Green

The cooling fan is operating normally.

Amber

The cooling fan has failed.

ICX 6400-EPS1500 external power supply

Brocade ICX 6430 and ICX 6450 Stackable Switches Hardware Installation Guide

52

Part Number: 53-1003617-03

Summary of Contents for ICX 6430 series













































































































Reviews:

No comments