manualshive.com logo in svg

Brocade Communications Systems FastIron SX 1600, Hardware Installation Manual

The Brocade Communications Systems FastIron SX 1600 is a highly advanced networking device that delivers exceptional performance and reliability. With its comprehensive Brochure & Specs manual, available for free download on our website, users can gain in-depth knowledge about the product's features and specifications to optimize its usage.

Share
Download
background image

116

Brocade FastIron X Series Chassis Hardware Installation Guide

53-1001723-02

Monitoring management module redundancy

5

Displaying switchover information

You can view the system log or the traps logged on an SNMP trap receiver, which includes 
Information about whether a switchover has occurred. In addition, refer to 

“Syslog message for 

Hitless OS upgrade and Hitless switchover”

 on page 111.

To view the system log or the traps logged on an SNMP trap receiver, enter the following command 
at any level of the CLI.

This output shows that one switchover occurred.

FastIron SX 800 Router# show log

Syslog logging: enabled (0 messages dropped, 0 flushes, 0

overruns)

    Buffer logging: level ACDMEINW, 25 messages logged

    level code: A=alert C=critical D=debugging M=emergency E=error

                I=informational N=notification W=warning

Dynamic Log Buffer (50 lines):

0d14h43m52s:N:System: Module was inserted to slot 9

0d14h43m23s:N:System: Fan speed changed automatically to 3

0d14h43m23s:N:System: Fan speed changed automatically to 3

0d14h43m23s:N:System: Fan speed changed automatically to 3

0d14h43m23s:N:System: Fan speed changed automatically to 3

0d14h43m23s:N:System: Fan speed changed automatically to 3

0d14h43m23s:N:System: Fan speed changed automatically to 3

0d14h43m20s:I:System: Interface ethernet 5/2, state up

0d14h43m19s:I:System: Interface ethernet 3/2, state up

0d14h43m19s:I:System: Interface ethernet mgmt1, state up

0d14h43m19s:I:System: Interface ethernet 6/13, state up

0d14h43m18s:I:System: Interface ethernet 4/1, state up

0d14h43m18s:I:System: Interface ethernet 2/13, state up

0d14h43m18s:N:System: Fan speed changed automatically to 2

0d14h43m18s:N:System: Fan speed changed automatically to 2

0d14h43m18s:N:System: Fan speed changed automatically to 2

0d14h43m18s:N:System: Fan speed changed automatically to 2

0d14h43m18s:N:System: Fan speed changed automatically to 2

0d14h43m18s:N:System: Fan speed changed automatically to 2

0d14h43m18s:I:System: Interface ethernet 1/13, state up 

0d14h43m16s:N:powered On switch Fabric 

0d14h43m09s:N:powered On switch Fabric

0d14h43m01s:I:

Mgmt CPU1 slot 9 failed

0d14h43m01s:I:System: Warm start

0d14h43m01s:I:SNMP: read-only community added by  from session FastIron SX 800

Summary of Contents for FastIron SX 1600

























































































































































































































Reviews:

No comments

Related manuals for FastIron SX 1600

Apevia X-Telstar User Manual preview
X-Telstar
Brand: Apevia Pages: 13
F5 ARX 6000 Hardware Installation Manual preview
ARX 6000
Brand: F5 Pages: 104
Crestron CNXCAGE Operations & Installation Manual preview
CNXCAGE
Brand: Crestron Pages: 12
B&B Electronics IE-MediaChassis/2 Operation Manual preview
IE-MediaChassis/2
Brand: B&B Electronics Pages: 13
Goldstar MC-993A Adjustment Instructions Manual preview
MC-993A
Brand: Goldstar Pages: 36
National Instruments CompactDAQ cDAQ-9185 User Manual preview
CompactDAQ cDAQ-9185
Brand: National Instruments Pages: 140
Cisco ASR 5500 System Administration Manual preview
ASR 5500
Brand: Cisco Pages: 430
Cisco cBR Maintaining Manual preview
cBR
Brand: Cisco Pages: 12
Cisco CRS Installation Manual preview
CRS
Brand: Cisco Pages: 148
Cisco cBR Hardware Installation Manual preview
cBR
Brand: Cisco Pages: 64
Cisco cBR Series Configuration Manual preview
cBR Series
Brand: Cisco Pages: 58
Cisco ASR 5500 Installation Manual preview
ASR 5500
Brand: Cisco Pages: 192
Cisco C4200 Maintaining Manual preview
C4200
Brand: Cisco Pages: 26
Cisco cBR Series Hardware Installation Manual preview
cBR Series
Brand: Cisco Pages: 270
Hammond Manufacturing 5-350D Series Assembly Instructions preview
5-350D Series
Brand: Hammond Manufacturing Pages: 2
IBM Flex System Enterprise Chassis Airborne Contaminant Filter Manual preview
Flex System Enterprise Chassis Airborne Contaminant Filter
Brand: IBM Pages: 12
TRENDnet TFC-1000 Specifications preview
TFC-1000
Brand: TRENDnet Pages: 2

Brands by name

Popular brands

Load more brands