BC4000 Series RAID Controllers
User Manual
02/13/06
B ro ad c om C o r p or at i on
Page 122
Managing Controllers, Arrays, and Disks: bcadm --manage
Document
BC4000-UM100-R
This option uses
--array
as a qualifier.
--check-end, -ce
The Stop Consistency Check option ends a consistency check on arrays, redundant types only. This option
uses
--array
as a qualifier.
--check-bitmap-start, -cbs
The Start Check Bitmap option starts a bitmap consistency check on arrays to verify that the parity on a RAID5
or RAID50 set, or the mirror halves on a RAID1/10 set, are consistent. This action is performed automatically
if your system crashes without shutting down gracefully; the option should be issued from the command line
only for test purposes. This option uses
--array
as a qualifier.
--check-bitmap-end, -cbe
The Stop Check Bitmap option ends a bitmap consistency check on arrays that is verifying that the parity on a
RAID5 or RAID50 set, or the mirror halves on a RAID1/10 set, are consistent. This option uses
--array
as a
qualifier.
Long form:
--check-start --array <list>
Short form:
-cs -a <list>
Example 1:
bcadm --manage --check-start --array 5
Example 2:
bcadm -M -cs -a *
Long form:
--check-end --array <list>
Short form:
-ce -a <list>
Example 1:
bcadm --manage --check-end --array 5
Example 2:
bcadm -M -ce -a *
Long form:
--check-bitmap-start --array <list>
Short form:
-cbs -a <list>
Example 1:
bcadm --manage --check-bitmap-start --array 5
Example 2:
bcadm -M -cbs -a *
Long form:
--check-bitmap-end --array <list>
Short form:
-cbe -a <list>
Example 1:
bcadm --manage --check-bitmap-end --array 5
Example 2:
bcadm -M -cbe -a *