Broadcast Tools WVRC-8, Installation And Operation Manual

Page: 8 / 42

e-mail:
support@broadcasttools.com
voice:
360.854.9559
fax:
866.783.1742
8
WVRC-8 Installation and Operation Manual
INSTALLATION
Name Type Description
SS Mon Control Sets the silence sensor audio sent to the phone line,
when enabled.
SS Sense Control Sets the audio trip point of the silence sensor.
Microphone Peep hole Used to monitor site audio when enabled.
PGM RJ11 Voice record TT phone port, user provided TT tele-
phone.
PGM Fem DB-9 RS-232 host PC programming port.
Rear panel connections, controls and switches.
Name Type Description
SND-/+ Connector Balanced send (to telco) audio input (TOP).
CLR -/+ Connector Balanced caller (from telco) audio output (TOP).
GND Connector Audio ground.
SS-LT/SS-RT Connector Unbalanced silence sensor audio input (BOTTOM).
GND Connector Audio ground (BOTTOM).
ALM/ALM Connector Normally open dry alarm relay contacts (BOTTOM).
PGM Fem DB-9 RS-232 host PC programming port.
NETWORK RJ45 ETHERNET port 10/100baseT, LAN/WAN.
LINE RJ11 Connects to telephone line.
PGM RJ11 Voice record TT phone port, user provided TT tele-
phone.
SEND Control Sets the audio level sent to the phone line.
CALLER Control Sets the telco caller level.
AN 1 – 8 Connector Analog (metering) inputs one thru eight (TOP).
AN GND Connector Analog (metering) ground reference terminals (TOP).
WEBSITE:
Visit our web site for
product updates and
additional information.