Broadcast Tools WVRC-8, Installation And Operation Manual

Page: 7 / 42

e-mail:
support@broadcasttools.com
voice:
360.854.9559
fax:
866.783.1742
7
WVRC-8 Installation and Operation Manual
INSTALLATION
Installation
Front panel indicators, controls and connectors
Name Type Description
K1 - K8 Raise LED Illuminates when corresponding raise relays are acti-
vated.
K1 - K8 Lower LED Illuminates when corresponding lower relays are
activated.
ST1 - ST8 LED Illuminates when corresponding status inputs are
activated.
TX LED Flashes during server/control processor data exchange.
RX LED Flashes during server/control processor data exchange.
REC LED Illuminated when in voice record mode.
RING LED Illuminated when a telco call is being received.
ACCESS LED Illuminated when a valid access code is entered.
HOOK LED Illuminated when the unit is off-hook.
TONE LED Illuminated when a valid DTMF tone is detected.
ALARM LED Illuminated when unit is in an alarm condition.
POWER LED Illuminated when valid power is applied to the power
jack.
PGM LED Illuminated when the unit is in programming mode.
SS LED Illuminated when adequate audio is applied to the SS
input, OFF when the level is to low and flashing if in
an SS alarm condition, if enabled.
PF LED Illuminated when adequate DC voltage is applied to
the PF jack, OFF with no power applied and flashing if
a Power Failure has been detected, if enabled.
PGM Push Button Toggles between operate and programming (local)
mode.