Instructions for Installation & Use
Instructions for Installation & Use
92
93
Consult the vehicle owner’s handbook for location of anchorage fittings or anchorage points and the
possible use of spacers. Some vehicles may have an anchor fitting fitted by the vehicle manufacturer. If
anchorage points cannot be found refer to car manufacturer or local child restraint fitting station or traffic
authority for optimum position of upper anchorage point and the use of spacers.
TOP TETHER STRAP
IMPORTANT INSTALLATION NOTE:
In some vehicles the upper anchorage point in the rear vertical panel can only be installed in one way.
Please refer to vehicle owner’s handbook or a child restraint fitting station for correct method.
THE ATTACHMENT CLIP COVER MUST ALWAYS BE USED AS IT PREVENTS
THE RISK OF INCORRECT FITMENT OF THE ATTACHMENT CLIP TO THE
UPPER ANCHORAGE POINT. BEFORE EACH USE OF THE RESTRAINT ALWAYS
ENSURE THAT THE ATTACHMENT CLIP IS CORRECTLY ENGAGED TO THE
UPPER ANCHORAGE POINT AND NOT HOOKED TO OR FITTED TO, ANY
OTHER OBJECT. THIS IS ESPECIALLY IMPORTANT IN VEHICLES SUCH AS
STATION WAGONS, VANS, HATCH BACKS OR VEHICLES WITHOUT A FIXED
PARCEL SHELF, SINCE THE ANCHOR POINT IS USUALLY NOT VISIBLE.
IMPORTANT:
MESSY MAT
™
(IF SUPPLIED)
The Messy Mats have been specifically designed to protect your
vehicle seat from damage by the child restraint and children’s shoes
rubbing against it. If the Messy Mat has been supplied it must be
used to protect the car upholstery.
Place pocket on edge of seat, smooth back toward seat join ('A')
and fit in any excess Messy Mat into the join of the car seat ('A').
CAUTION:
The Messy Mat pocket is only for small, light items. DO NOT
overload the pocket with heavy, bulky items as this may damage
the pocket or cause passengers to trip over them.
Long Messy Mat
(If supplied)
'A'
Note: Some Messy Mats
may not have pockets.
Short Messy Mat
(If supplied)
'A'
INSTALLATION OF CAR'S UPPER ANCHOR FITTING
ACCESSORIES
