Instructions for Installation & Use
Instructions for Installation & Use
62
63
HOW TO INSTALL USING SEATBELT
HOW TO INSTALL USING SEATBELT
Fully press Adjuster Button (1) while
pulling Upper Anchorage Strap (2) to
lengthen.
Roll up excess
strap and store
in the pocket
attached to the
cover.
Attach
Attachment Clip
Car's Anchor Fitting
Pull Adjustment Strap to remove slack
1
2
H. If upper anchorage strap is folded up for storage undo
storage strap then lengthen. Fully press adjuster button
(1) while pulling upper anchorage strap (2) to lengthen.
I. Fit the attachment clip on the upper anchorage strap to
the anchor fitting as shown. Make sure to remove as
many twists as possible from the upper anchorage strap.
Always attach the hook and remove slack
J. Tighten adjustable top tether strap by pulling adjustment
strap to remove slack as shown below, but do not over-
tighten causing the restraint base to lift off the vehicle
seat.
K. Fold up excess strap and use the top tether pocket to
store excess strap away from child's reach.
Always remove slack from top tether.
A loose top tether is dangerous.
CAUTION:
CHILDREN CAN BE INJURED OR RESTRAINTS AND TOP TETHER STRAP
DAMAGED BY UNSECURED CARGO IN A COLLISION. SECURE OR REMOVE
HAZARDOUS CARGO BEFORE USING THIS CHILD RESTRAINT.
Always secure the loose end of the top tether strap to prevent it hanging out of the car or being
accessible by the child.
THIS RESTRAINT IS NOT SUITABLE FOR USE WHERE THE TOP TETHER STRAP MAY FALL
INTO A SPLIT IN THE SEAT BACK OR OFF THE SIDE OF THE SEAT.
Always ensure that the car seatbelt is firmly restraining the restraint on the vehicle seat.
ALWAYS ATTACH TOP TETHER HOOK AND REMOVE SLACK IN THE TOP TETHER STRAP.
A LOOSE TOP TETHER IS DANGEROUS.
Check that the seatbelt is not twisted and the diagonal belt is only clamped by the lock-off which is
located on the opposite side from the car seat buckle.
IMPORTANT :
