Instructions for Installation & Use
Instructions for Installation & Use
40
41
HOW TO INSTALL USING ISOFLEX CONNECTORS
HOW TO INSTALL USING ISOFLEX CONNECTORS
DO NOT USE RESTRAINT IN REARWARD FACING MODE
WITHOUT STABILISING BAR FULLY EXTENDED.
THE TOP TETHER STRAP MUST ALWAYS BE FITTED WHEN THE
CHILD RESTRAINT IS USED IN A VEHICLE.
ALWAYS ATTACH THE HOOK AND REMOVE THE SLACK.
ISOFIX Compatible version shown.
Hook Attachment
Clip to the car's
anchor fitting.
Leave one side of the tether strap slack to
allow the baby to be placed in the restraint.
Final adjustment with baby installed.
With baby installed, pull to remove all slack -
do not over tighten causing the seat to lift.
Store instruction
manual in
pocket provided
and tuck pocket
under trim
cover.
FITTING SUMMARY
Front of
vehicle
I. If upper anchorage strap is folded up for storage
undo storage strap to lengthen. Fully press adjuster
button (1) while pulling upper anchorage strap (2) to
lengthen.
J. Fit the attachment clip to the car's anchor fitting as
shown right. Make sure to remove as many twists as
possible from the upper anchorage strap.
K. Tighten top tether strap by pulling adjustment strap
to remove slack, leave the strap slack on the side the
baby will be placed into the seat from. Any slack will
be removed once the baby has been harnessed into
the seat.
L. Remove the slack from the adjustable top tether strap
by pulling adjustment strap, With the baby in harness,
remove all slack in the top tether strap. Roll up excess
strap and store in the pocket provided on the cover.
Do not tighten the top tether strap such that the
restraint is lifted up. Remove slack only.
Always remove slack from top tether.
A loose top tether is dangerous.
CAUTION:
CHILDREN CAN BE INJURED OR RESTRAINTS AND TOP
TETHER STRAP DAMAGED BY UNSECURED CARGO IN A
COLLISION. SECURE OR REMOVE HAZARDOUS CARGO
BEFORE USING THIS CHILD RESTRAINT.
Fully press Adjuster Button (1) while
pulling Upper Anchorage Strap (2) to
lengthen.
Roll up excess
strap and store
in the pocket
attached to the
cover.
Pull Adjustment Strap to remove slack
1
2
Attach
Attachment Clip
Car's Anchor Fitting
