Instructions for Installation & Use
- Series No. 8100/A/2010
Instructions for Installation & Use
- Series No. 8100/A/2010
12
13
INSTALLATION AND USE OF RESTRAINT
For Toddlers who have reached the shoulder height limit on their infant restraint refer to pages 10-24.
For Children who have reached the shoulder height marker and need to use a booster seat refer to
Pages 25-52.
HOW TO SET-UP
TO BE USED WITH A LAP SASH OR LAP ONLY SEAT BELT IN THE BACK OF MOST CARS WITH
FORWARD-FACING SEATS.
To be used in forward-facing position by children whose shoulders are above the lower shoulder
height marker (approximately 6 months of age) until their shoulders reach the upper shoulder height
marker (approximately 4 years of age).
Continue to use this infant restraint until the child reaches this limit.
Do not use this restraint until the child’s shoulders are above the lower shoulder height marker.
Infants are at risk of serious injury if they face forward too early.
Children are at risk of serious injury if they move to booster seats too early.
The child should not sit in this forward facing child restraint until their neck muscles are able to
support their head. Britax recommends that you keep your child in a rearward facing restraint for as
long as possible (up to approx 12 months).
Regional Road Rules may prohibit the use of this restraint in the front seat until the child is 4 years of
age. Check your Regional Rules for exemptions.
• Fit the restraint firmly to the car seat and then fit the harness firmly to the child.
• A loose restraint or harness is dangerous.
• Do not use in a front seat, unless it has a child restraint anchorage point i.e.: utilities.
• Do not use the restraint without the Upper Anchorage Strap correctly attached.
• Do not use on any vehicle seat which faces sideways or rearwards.
• WHERE AN AIRBAG IS FITTED IN THE SEATING POSITION WHERE THE CHILD RESTRAINT IS TO
BE FITTED, FOLLOW THE VEHICLE MANUFACTURERS WARNINGS AND INSTRUCTIONS.
• Always use lap or lap-sash seat belt and upper anchorage strap to attach the child restraint to the
vehicle seat.
• Ensure that the
SLIDEGUARD™ Converter
is stored in the recess under the cover when the seat is
used in Toddler mode, to avoid injury or discomfort.
SUITABLE FOR USE
TODDLER USE
(WITH IN-BUI
LT
HARNE
SS
)
TODDLER USE
(WITH IN-BUI
LT
HARNE
SS
)
UPPER ANCHORAGE
Refer to your vehicle owner’s manual for
the location of the anchor fitting in the car. If
the vehicle is not fitted with a child restraint
anchor fitting then refer to page 64 for the
installation of the anchor fitting provided with
this child restraint.
Attachment Clip
Car's Anchor
Fitting
