manualshive.com logo in svg

Britax Maxi AHR Easy Adjust, Instructions For Installation And Use Manual

Share
Download
Britax Maxi AHR Easy Adjust Instructions For Installation And Use Manual Download Page 30

Instructions for Installation & Use

 - Series No. 8100/A/2010

Instructions for Installation & Use

 - Series No. 8100/A/2010

CARE & MAINTENANCE

CARE & MAINTENANCE

58

59

TO REPLACE COVER:

A.

 Feed the Harness Tongues and shoulder straps 

through the side slots in the cover.

B. 

 Stretch the cover over the top of the restraint 

first, then the sides, then stretch the cover 

around the rim of the restraint. Attach the 

elastic loops to the hooks on the restraint. 
Ensure the elastic next to the harness is pulled 
over the bar and then attached to hook.

C.

  Re-fit the Seat Cover attachments.

D.

  Reattach the press studs in the middle panel, 

feed the Crotch Buckle through slots in cover

E. 

 If fitted with a Push Button Adjuster, stretch 

cover over Push Button housing. Pull the 
adjuster strap through the cover. Ensure none 
of the harness straps are twisted.

unhook elastic loop at the back of the restraint

B

D

F.

  Fit the Headrest cover over Headrest and slide harness 

through slots in the seat and the cover.

G.

 Refit the Insert Pad (if fitted) and crotch pad insert or other 

accessories if required. If the headrest has moved then reset 

the headrest so the shoulder straps are near the shoulder.

H.

 Refit to the vehicle.

See pages 60 to 63 to remove or replace any Accessories. 

ONLY USE SAFE-N-SOUND SEAT COVERS THAT ARE DESIGNED 
AND TESTED FOR USE WITH THIS PRODUCT.

Pull to unclip press stud

F

    VERY IMPORTANT:

 

Only use this child restraint with the cover supplied or a 
manufacturer-authorised replacement cover with identical 
shoulder height markers.

Summary of Contents for Maxi AHR Easy Adjust






































Reviews:

No comments

Brands by name

Popular brands

Load more brands