Instructions for Installation & Use
- Series No. 8100/A/2010
Instructions for Installation & Use
- Series No. 8100/A/2010
42
HOW TO INSTALL WITH A CHILD HARNESS
HOW TO INSTALL WITH A CHILD HARNESS
43
1
2
4
1.
Attachment Clip from Child Harness.
2.
VERSA
TETHER™ Catch.
3.
Booster seat Attachment Clip.
4.
Anchor Fitting in the car.
Child Harness Attachment Clip attaches
to the
VERSA
TETHER™ Catch
3
1
INSTALLING INTO VEHICLE WITHOUT EXTENSION STRAP
Hook the Child Harness attachment clip (1) onto
VERSA
TETHER™ Catch (2). Then hook attachment
clip (3) onto anchor fitting. Ensure that none of the straps are twisted and not passing over any sharp
edges.
CHILD USE
(BOOSTER SE
AT
MODE WITH CHILD HARNE
SS
)
CHILD USE
(BOOSTER SE
AT
MODE WITH CHILD HARNE
SS
)
INSTALLING INTO VEHICLE WITH AN EXTENSION STRAP
Hook the Harness clip first onto the extension strap catch, then hook the extension strap hook onto the
VERSA
TETHER™ Catch on the Booster Seat’s upper anchorage strap as shown below. Ensure that
none of the straps are twisted or catching on sharp edges. Tighten the Booster Seat’s upper anchorage
strap (refer to page 36) then remove excess slack from the extension strap by pulling the adjuster
strap as illustrated below.
Always attach the hook and remove the slack.
Pull to remove
slack
Attachment Clip attaches to
the
VERSA
TETHER™ Catch
To lengthen the Adjustable Extension strap
rotate the adjuster and pull the main strap.
6
2
4
5
7
3
7
1
Pull to remove
slack
Pull to
lengthen
Rotate the
Adjuster to
lengthen
