Instructions for Installation & Use
- Series No. 8100/A/2010
Instructions for Installation & Use
- Series No. 8100/A/2010
34
HOW TO USE
35
HOW TO USE
ADJUSTING THE CROTCH BUCKLE HEIGHT
The crotch buckle SLIDEGUARD™Converter height adjustment is
by threading the 3 bar anchor plates into extra slots to shorten the
buckle height. The seat has the crotch straps fitted in position when
supplied.
A.
Lift trim cover to reveal crotch strap slot.
B.
Turn the crotch 3-bar slide and push through each slot as shown
right until the Crotch strap assembly is free from the seat.
C.
Insert Crotch strap through restraint slot which will position Crotch
strap level with the child’s crotch and feed back through other slot as shown right.
Use Position 2 for smaller children and Position 1 and 3 for larger children.
B
4 Slots
CHILD USE
(BOOSTER SE
AT
MODE WITH SEA
T BE
LT
)
CHILD USE
(BOOSTER SE
AT
MODE WITH SEA
T BE
LT
)
When replacing cover, ensure none of the harness straps are twisted and that all straps are
secure by pulling each harness strap.
IMPORTANT :
1. Longest Length
for Toddler mode and
largest child in Booster
3. Mid Length
for Booster Mode-
Mid size Child
2. Shortest Length
for Booster Mode-
Smallest Child
3 Bar Anchor
Slot
PLACING CHILD IN THE RESTRAINT USING LAP SASH SEAT BELT &
UPPER ANCHORAGE STRAP
A.
Determine whether an upright or reclined
installation is preferred as shown right.
B.
To move the Recline Foot from reclined to
upright mode or vice versa pull the Foot
outwards to unlock it, then rotate the foot.
Push to lock in place. Swing the seat back
until it sits firmly on the vehicle seat.
Reclined
Upright
