manualshive.com logo in svg

Britax Maxi AHR Easy Adjust, Instructions For Installation And Use Manual

Share
Download
Britax Maxi AHR Easy Adjust Instructions For Installation And Use Manual Download Page 25

Instructions for Installation & Use

 - Series No. 8100/A/2010

Instructions for Installation & Use

 - Series No. 8100/A/2010

HOW TO INSTALL WITH A CHILD HARNESS

HOW TO INSTALL WITH A CHILD HARNESS

48

49

A. 

 With the child seated, place each of the 

harness straps over each shoulder. 

B.

  Feed the Right hand strap (loop end) into the 

cross strap loop to connect the two sides.

These instructions apply to fitting with a lap only seatbelt or a converted lap-sash seatbelt.

Connect the Child Harness to the 

VERSA

TETHER™ Catch as detailed on pages 42 and 43.

HARNESSING THE CHILD INTO THE BOOSTER SEAT

8

 

CHILD USE

(BOOSTER SE

AT

 MODE WITH CHILD HARNE

SS

)

 

CHILD USE

(BOOSTER SE

AT

 MODE WITH CHILD HARNE

SS
)

1.

 Left Hand Harness Strap

2.

 Right Hand Harness Strap

3.

 Storage strap

4. 

Cover Pad

5. 

Right Hand Harness Strap Loop

6.

 Cross Strap Loop

7.

 Cross Strap

8. 

Attachment Clip

Pull to remove 

slack

1

2

5

6

7

3

4

C. 

 Feed the adult belt (lap belt or converted lap/sash) through the harness loops, ensuring that the 

cross strap loop does not disconnect. Also ensure there are no twists in the harness, cross strap 

and seat belt.

Thread the converted lap-sash seat belt or lap seat belt through the harness strap loops as shown.

Harness 

strap

loops.

Converted 
lap-sash
seat belt.

Lap belt.

D. 

 Engage the seat belt tongue to the buckle and 

adjust the seat belt to sit firmly around the 
child’s hips and thighs. The seat belt buckle 
should be located as low as possible below 
the child’s hip. If using a lap-sash seatbelt and 
Gated Slide you will need to adjust it so that 
the seatbelt is firm on the child’s thighs and 

the Gated Slide is close to the child but not 

touching the child. 

The Gated Slide 
needs to be close 
to the child but not 

touching the child. 

The Gated Slide 
needs to be under 
the armrest.

Summary of Contents for Maxi AHR Easy Adjust






































Reviews:

No comments

Brands by name

Popular brands

Load more brands