REFRESH
INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Maintenance
Step 4:
Using your hand, remove the Stage 2 filter panel. Refer to the picture below.
Removing the Stage 2 filter
Step 5:
Do a visual inspection of the Refresh Unit as follows:
Step a)
Check all internal surfaces for excessive deposits of grease. Clean as
necessary. Refer
Section 4.2.3.5 Deep Cleaning the Refresh Unit
Step b)
Check all external surfaces for dust and dirt build-up. Clean as necessary.
Refer to
Section 4.2.3.5 Deep Cleaning the Refresh Unit
Step c)
Check the unit is secure.
Step d)
Check LED lamps are lit. Replace any LED lamps not lit. Refer to:
Section 4.4.3.5 Removing an LED Lamp
Section 4.4.5.5 Replacing an LED Lamp
Step 6:
Check Stage 1 baffle type grease filters are free from dirt, dust and grease build up.
Clean as necessary. Refer to
Section 4.2.3.1 Cleaning Stage 1 Baffle Type Grease
].
Step 7:
Check the condition of stages 2 to 5. Refer to
Section 4.3.1.1 Filter Status Screens
Step 8:
Refer to the following Steps for removing filter stages as necessary:
Step a)
For removal of Stage 2 filters, refer to
Section 4.4.3.1 Removing Stage 2
Step b)
For removal of Stage 3 filters, refer to
Section 4.4.3.2 Removing Stage 3
Step c)
For removal of Stage 4 filters, refer to
Section 4.4.3.3 Removing Stage 4
Step d)
For removal of Stage 5 carbon cell filters, refer to
Page 66 of 70
Issue: Final
Summary of Contents for Refresh Maxi
Page 71: ......
