REFRESH
INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Maintenance
Pushing the Bezel Back into the Fitting
Pushing the Bezel Back into the Fitting
Step 3:
Carefully squeeze the two spring clips above the bezel and gently push the lamp up
and inside the canopy.
Step 3:
Carefully squeeze the two spring clips above the bezel and gently push the lamp up
and inside the canopy.
Squeezing the Clips to Replace the Lamp to the Canopy
Step 4:
Using your fingers, push the bezel upwards so it is flush to the surface of the canopy.
Pushing the Lamp Flush to the Canopy
Step 5:
Using the clean dry cloth, remove any finger marks from the bezel glass.
Step 6:
Switch
ON
the power supply.
Step 7:
Switch
ON
the canopy lighting.
Issue: Final
Page 63 of 70
Summary of Contents for Refresh Maxi
Page 71: ......
