REFRESH
INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Maintenance
4.4.5.4 Replacing Stage 5 Carbon Cells
Step 1:
Using the correct loose granule carbon media, re-fill the cells.
Step 2:
Replace each of the Stage 5 carbon cells by sliding the individual vertical cells in
horizontally between their guide rails. Refer to the picture below.
Replacing Each of the Stage 5 Carbon Cells
Step 3:
Close the upper front access panel of the Services Tower and lock.
Step 4:
Switch
ON
the electrical power supply.
Step 5:
Reset the filter operational hours. Refer to
Section 3.3 Resetting the Filter Operational
.
Step 6:
Check the unit is operating correctly.
4.4.5.5 Replacing an LED Lamp
WARNING:
USE SUITABLE AND APPROVED EQUIPMENT WHEN WORKING AT HEIGHT.
Step 1:
Gently twist and push the lamp into its fitting.
Refitting the Lamp to its Fitting
Step 2:
Gently push the bezel into the fitting.
Page 62 of 70
Issue: Final
Summary of Contents for Refresh Maxi
Page 71: ......
