Britannia Refresh Maxi, Installation, Operation And Maintenance Manual

Page: 18 / 72

REFRESH
INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Assembly, Installation and Commissioning
2.1.5 Storage and Preservation
2.1.5.1 Storage
Caution:
Supplied packaging provides protection against scratches and scrapes only.

Items must not be stored in high traffic areas. No impact protection is provided.
2.1.5.2 Preservation

Items must be stored in dry conditions.
2.2 Assembly
2.2.1 Preparation for Unpacking
Step 1: Ensure you place items to be unpacked as near as possible to the site of installation.
Step 2: Ensure you have sufficient free space to work.
2.2.2 Unpacking Procedures
Step 1: Using a suitable tool, remove the plastic banding around the item
Step 2: Remove all packaging as necessary.
2.2.3 Preparation for Assembly
2.2.3.1 Personnel

Skilled site engineers

Senior site installation engineers (site Foreman).
2.2.3.2 Personal Protective Equipment (PPE)
The need for PPE must be identified once a full risk assessment has been carried out. Refer to
Section 2.1.1 Risk Assessment .
Below is a list of PPE that
must be worn when assembling BKV equipment:

Safety footwear with steel mid-sole, steel toe caps, padded ankle protection and high grip
soles.

High visibility vest

Kevlar gloves

Carpenter gloves

Safety spectacles

Safety goggles.
Tools Required:

Suitable and approved lifting equipment

Adjustable support stands

Spirit level

Suitable hand tools]

Suitable spanner to tighten M10 fixings.
Drawings:

Refer to Section 4.6 GA Diagrams for reference.
Page 18 of 70 Issue: Final