REFRESH
INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Maintenance
4.2.3.1 Cleaning Stage 1 Baffle Type Grease Filters (All Units)
Caution:
If primary filtration is not regularly cleaned & maintained, then hygiene and fire risks are
created down-stream.
These are high efficiency Britstream baffle-type grease filters. Filter cleaning should only take place
when cooking operations are suspended.
Step 1:
Switch
OFF
and isolate the electrical power supply.
WARNING:
USE SUITABLE AND APPROVED EQUIPMENT WHEN WORKING AT HEIGHT.
Step 2:
Safely position suitable access equipment. Remove the grease filter by gripping and
lifting the panel upward and then tilting/lowering the bottom edge forward and clear of
the housing. Refer to the picture below.
Step 3:
Using a commercial dishwasher, clean the grease filter.
Step 4:
Replace the grease filter making sure that the panel is the right way around with any
framework drain holes at the front, lowest edge.
Step 5:
Switch
ON
the electrical power supply.
4.2.3.2 Removing Grease from the Canopy (All Units)
WARNING:
USE SUITABLE AND APPROVED EQUIPMENT WHEN WORKING AT HEIGHT.
Step 1:
Safely position suitable access equipment. Place a suitable container underneath the
slot head drain screw.
Grease Drainage Hole
Page 38 of 70
Issue: Final
Summary of Contents for Refresh Maxi
Page 71: ......
