© BriskHeat Corporation. All rights reserved.
2
FE-Series Heating Cable Installation Instructions
TABLE OF CONTENTS
Introduction ........................................................................................................................................... 2
Applications ........................................................................................................................................... 2
Approvals .............................................................................................................................................. 2
Important Safety Instructions ................................................................................................................. 3
Connection/Termination Kits Descriptions ............................................................................................. 4
Prior to Installation ................................................................................................................................ 4
Lead Termination Preparation ............................................................................................................... 5
End Termination Preparation................................................................................................................. 6
Power Input Connection Installation ...................................................................................................... 7
Splice Installation .................................................................................................................................. 8
Heating Cable Installation ..................................................................................................................... 9
Installing Thermal Insulation……………………………………………………………………………………..10
Electrical Insulation Resistance Test…………………………………………………………………………...11
Periodic Inspection Record ................................................................................................................... 11
Maintenance Instructions ...................................................................................................................... 13
Emergency Procedures ......................................................................................................................... 13
Troubleshooting Guide .......................................................................................................................... 14
Warranty Information ............................................................................................................................. 15
INTRODUCTION
Thank you for purchasing a BriskHeat
FE series constant-wattage heating cable system. A heating cable
system is a combination of heating cable, connection / termination kits, temperature controller, and
accessories based on your particular application. Your heater is designed to provide a long and efficient
service life with function, reliability, and safety in mind.
All BriskHeat Constant-Wattage Heating Cable utilize a parallel resistance modular design. This allows
the heating cable to be cut to length and terminated in the field, without affecting the heating power per
unit length. The modular design enables the cable terminations / electrical connections to be made with
cold leads and cold ends (e.g. cable not heated in electrical junction box).
A temperature controller is required for all constant-wattage heating cable.
For additional information concerning this, or other BriskHeat products, please contact your local
BriskHeat distributor or contact us toll free (U.S. and Canada) at 1-800-848-7673 or 614-294-3376.
Ordinary Locations
Hazardous Locations
Class I, Division 2, Groups B, C, & D
Class II, Division 2, Groups F & G
Class III, Division 2
Tinned Copper Braid Only
Ordinary Locations
(120 and 230VAC only)
2014 / 35 / EU (Low voltage directive)
IEC 60519-1
2011 / 65 / EU (RoHS 2 directive)
2012/19/EU (WEEE Directive)
Approvals valid only when
installed in accordance with all applicable instructions, codes, and regulations.
APPROVALS
Intended Applications:
General Purpose Trace Heating
Pipe/Tank/Vessel Heating
Ordinary and Hazardous Locations
Dry Area Applications
Prohibited Applications:
Outdoor use
Immersion heating
Use on non-metallic fixtures
Wet Area Applications
APPLICATIONS
©
BriskHeat
®
Corporation. Tutti i diritti riservati.
75
Cavo scaldante Serie FE Istruzioni di installazione
NOTA
