BRINKS BHS-3000A, User Manual

Page: 37 / 54

27
Trouble Messages
You will get a trouble message if the system loses power, if it cannot
reset the smoke detector, or if it cannot contact the monitoring center.
Standard Keypad
1. If the TROUBLE light is on, press the OPTIONS key, then the 9
key. One of the keypad’s zone lights blinks; compare it to the table
below.
Blinking Zone LED Trouble Condition Page
1 Low battery 29
2 Communication Problem Indication 30
3 Zone Trouble Indication 32
4 Call Brink’s Indication 32
5 Component Failure Indication
32
6 Siren Failure Indication 32
8 Line Cut Indication (optional feature) 31
2. Press the OPTIONS key and the 9 key once more. One of the
keypad’s zone lights may blink; compare it to the table below. If
none of the conditions exist, the keypad returns to its normal state.
Blinking Zone LED Trouble Condition Page
1 Upload/Download Failure 31
2 No AC Power Indication 28
Premium Keypad
1. Observe which of the keypad’s icons are lit, and note any letters
that may appear in the numeric display. Match the keypad’s
message to the table below, then turn to the section listed in the
table’s second column for further information and instructions.
Message Trouble Condition Page
CALL 800-445-0872 Call Brink’s Indication 32
CF TROUBLE Component Failure Indication 32
CP TROUBLE Communication Problem Indication 30
CS TROUBLE Siren Failure Indication 32
CH TROUBLE Upload/Download Failure 31
LINE CUT Line Cut Indication (optional feature) 31
LOW BATT Low Battery Indication 29
NO AC No AC Power Indication 28
TROUBLE (beeping) Zone Trouble Indication 32