BRINKS BHS-3000A, User Manual

Page: 34 / 54

24
6. If you do not hear
the siren blast, call
Brink’s at
1-800-445-0872.
6. If you do not hear
the siren blast, call
Brink’s at
1-800-445-0872.
7. When you have
finished, press the
CANCEL key.
7. When you have
finished, press the
CANCEL key.
*Note: If the system has four-digit codes, press 2,4,7, then press and
hold the 0 key for three seconds.
Testing the Smoke Detector
The smoke detector can be tested without sending an alarm signal to
Brink’s Monitoring Center. Call Brink’s Customer Care at
1-800-445-0872 for assistance. Do not attempt to test the smoke
detector with heat, flame, or canned smoke. These methods can
damage the smoke detector.
Testing the Doors and Windows Only
This test identifies whether the sensors on your home’s protected doors
and windows are operating properly. You may prefer to conduct this test
if you find it distracting to hear the siren blast each time you pass the
motion detector during the test.
No alarm signals are sent to the
Brink’s Monitoring Center.
To test the system’s door and window sensors, follow the instructions on
the next page.
NOTE: If the system’s chime feature is on, skip steps 2,
3, and 4 of the Standard Keypad instructions or steps 2 and 3 of the
Premium Keypad instructions. When the chime feature is on, the keypad
beeps if a protected door or window is opened while the system is off.