BRINKS BHS-3000A, User Manual

Page: 19 / 54

9
Turning the System On in Normal Mode
1. Close all of the doors and windows and make
sure that the message window reads READY
or the READY light is lit. (If not, see page 11
. )
2. Press the ON key.
The ON light begins to blink, telling you that
the system is on and that the exit delay has
begun. The Premium Keypad displays the
number of seconds left in the exit delay.
3. Exit promptly. You must leave the building
before the delay ends. The standard delay is
80 seconds.
If the ON light stops blinking and is steadily lit,
the exit delay has ended. If you open a door
now, you will cause an alarm. Turn the system
off by entering your user code, then start over.
Turning the System On with Motions Turned Off Mode
1. Close all of the doors and windows and make
sure that the message window reads READY
or the READY light is lit. (If not, see page 11.)
2. Press the ON key.
3. Press the MOTION OFF key. (You must press
the MOTION OFF key no more than 20
seconds after you press the ON key.)
The ON light blinks. The Premium Keypad reads
ON, MOTION OFF. The Standard Keypad’s
MOTION OFF and ON lights are lit.