Use and Maintenance Manual – VER. 2016-02
Page 17
CAR
Cars
TRUCK
Trucks
Default at power-on
SUV
Off-road vehicles
Not suitable for balancing truck wheels
Each of the above programs sets specific values to measure wheel sizes and calculate imbalances. The special features of each
program are listed in the following paragraphs.
To select a specific Wheel Type, press the [P6] key repeatedly
until the relative LED lights up, as shown in table T16.3.
16.2.1 CAR wheel type (passenger cars)
Selecting the CAR Wheel Type allows balancing passenger car wheels. For off-road vehicles, it may be appropriate to select the SUV
Wheel Type (see paragraph below).
To select the CAR wheel type, press the [P6] key repeatedly
until the CAR LED of the LED Wheel Type group lights up.
See table T16.3.
16.2.2 TRUCK wheel type
Selecting a TRUCK wheel type allows balancing truck wheels.
To select the TRUCK wheel type, press the [P6] key repeatedly
until the TRUCK LED of the LED Wheel Type group
lights up. See table T16.3.
16.2.3 SUV wheel type (off-road vehicles)
Selecting the SUV wheel type allows balancing off-road vehicle wheels. These vehicles are generally equipped with wheels that are
larger than normal, and the tyre is relatively large compared to the diameter of the rim (i.e. not the low profile or super low profile
types). The selection for this wheel type does not allow balancing truck wheels, because the latter have rims with considerably
different profiles.
The choice of the CAR or SUV wheel type is at the discretion of the operator who should run balancing tests to determine which
Wheel Type gives the best results for the particular wheel to be balanced.
To select the SUV type wheel, press the [P6] key repeatedly
until the SUV LED of the LED Wheel Type group lights up.
See table T16.3. For SUV wheel type all Programs Type listed in table T16.1. are available.
Summary of Contents for VULTURE BP46
Page 1: ...BP46 VULTURE ...
