BRIGHT VULTURE BP46, Manual

Page: 16 / 42

Use and Maintenance Manual – VER. 2016-02 Page 15
Spins stopped using the [P10] Stop button can be repeated by pressing the [P8] Start button
.
How to exit machine calibration for the CAR/SUV Wheel Type
At any time it is always possible to exit the calibration procedure in progress by pressing [F+P3] . The
machine will return to SERVICE mode displaying the
SER SER
writing. To return to NORMAL mode, press [F+P3] again
. The calibration procedure in progress will be cancelled and the machine will use the previous
calibration values.
16. USE OF THE MACHINE IN NORMAL MODE
Display for the machine controls
To use the machine, select or set the following:

Program Type (program for wheels with steel, aluminium or special aluminium rims). Default = program for wheels with
steel rims;

Wheel Type (car, truck, SUV). Default = truck;

Size of the wheel to be balanced. The measurements can be entered manually (always) or in partially automatic mode.

Dynamic or Static Balancing. Default = Dynamic;

Display resolution X1 or X5. Default = X5.
The selections described above can be entered before or after the spin. For any variation of the selections or data settings, the
machine will run a recalculation by displaying the new imbalance value.
When the required selections/settings have been made it is possible to run a spin cycle by pressing [P8] Start . At the
end of the spin, the machine displays the wheel imbalance values.
Apply the weights displayed by the machine in the indicated positions, and then run a second test spin. Normally, weights should
be applied at 12 o’clock, with the exception of special programs for ALS1 and ALS2 aluminium.
16.1 Program Type
The machine allows the choice between eight different Program Type of balancing as listed in table T16.1.
Table T16.1: Program types available