31
2. Disassemble panel cover to locate and check the wire
connections (
A
, Figure 66).
3. Locate battery winding connector (
B
, Figure 67) and
mesure resistance across the terminals (
C
).
Figure 66
A
A
•
If resistance is 0.3 - 0.7 Ω the winding is good.
• If
resistance
is
not to specification, check wire connections,
or repair/repace wires, then retest.
•
If resistance is still not to specification, replace battery
winding.
Figure 67
C
B
•
Repair and/or replace any loose wire connections and
retest.
•
If DC ouput is still not measured, proceed to Step 3.
Not
for
Reproduction
