Brewer Fitness Laddermill Ascender, Owner'S Manual

Page: 23 / 38

19
Laddermill Owner’s Manual—2017
Service Instruc ons
CAM
PULLEY
CABLE ADJUSTER
Speed Lever Adjustment
1. Adjust the speed lever to the slowest
posi on.
2. The hydraulic unit is at the top of the right
channel. Remove the cover (two screws).
3. Note the cam and pulley that together
control the valve. With the lever at slowest
posi on, the pulley should be at the highest
point of the cam. There is a notch at the
highest point that the pulley fits into.
4. If the pulley is not at the highest posi on,
ghten the cable with the adjuster.
5. Operate the lever a few mes to check the
adjustment. If the wall s ll creeps
excessively, see the instruc ons for adjus ng
the cam follower.
NOTCH
Auto-Stop Adjustment
1. Remove the lower bearing shroud
2. Check for smooth movement of the auto stop
foot peddle and the control cable.
3. Remove the hydraulic box cover and make sure
that the control cable is ght.
4. You can use the cable adjuster to ghten the
cable.
5. With the speed set at “10” make sure that the
small barrel lock is touching the pulley lever
assembly.
Actuator spring and
control cable
Auto stop Cable
adjuster
Auto stop barrel
lock posi on at
speed 10