7
6
Due to our policy of continuous improvement, the actual product may differ slightly from the one illustrated in these instructions.
1. Brew Head
2. Porta-Filter:
a. Porta-Filter for Ground Coffee and E.S.E.
pods (45mm)
3. Height Adjusting Slot for Small Cups
4. Removable Drip Grid
5. Removable Drip Tray
6. Drip Tray Overflow Floater
7. Filters For:
a. Single Shot of Espresso and E.S.E. pods
(45mm)
b. Double Shot of Espresso
c. Detachable Bottom Covers of Filters
8. Measuring Scoop/Tamper
9. Control Panel
a. Progress Bar
b. Single (1) & Double (2) Espresso Button
c. Small (1) & Large Latte Button Button
d. Small (1) & Large (2) Cappuccino Button
e. Manual Espresso Brew Button
f. Manual Milk Frothing Button
g. Clean Button
10. Removable/Clear Milk Reservoir
11. Milk Reservoir Lid
12. Milk Reservoir Release Button
13. Milk Froth Level Control Knob
14. Milk Frothing Tube Guide Lever
15. Frothed Milk Dispensing Tube
16. On/Off Switch “I/O”
17. Removable Water Tank
18. Water Tank Lid
19. Milk Hose
INTRODUCTION
Congratulations! You have selected
the new and innovative Breville
®
Prima
Latte III. This unique appliance has been
designed to help you prepare delicious
espressos, cappuccinos and lattes quickly,
conveniently, and automatically with the
touch of a button.
ESPRESSO
A unique method of coffee brewing in
which hot water is forced through finely
ground coffee. Popular in Europe, it is a
far richer and more full-bodied brew than
regular drip coffee. Because of its richness,
espresso is usually served in 45 to 60 ml
(1.5 to 2 oz.) portions, in demitasse cups.
CAPPUCCINO
A drink made with about 1/3 espresso, 1/3
steamed milk, and 1/3 frothed milk.
LATTE
A drink made with about 1/4 espresso and
3/4 steamed milk.
Please read ALL of the instructions,
cautions, notes and warnings included in
this instruction manual carefully before you
begin to use this appliance. When this unit
is used, some parts and accessories get
hot and need to cool down. Proper care
and maintenance will ensure the long life of
the Breville
®
Prima Latte III and its trouble-
free operation. Save these instructions and
refer to them often for cleaning and care
tips.
Your Breville
®
Prima Latte III can be used
with ground coffee as well as E.S.E. pods
(45 mm), making it exceptionally practical
and versatile to prepare single shots of
espresso, cappuccino and latte.
BEFORE USING YOUR APPLIANCE
FOR THE FIRST TIME
CLEANING THE UNIT PRIOR TO FIRST
USE
Please refer to the “Description of the
Appliance” section to familiarise yourself
with the product and identify all parts.
1. Please make sure the unit is off “O” by
pressing the on/off “I/O” switch located
on the right side of the unit. Make
sure it is unplugged from the electrical
outlet.
2. Remove stickers and labels from the
unit.
3. REMOVE RED PLUG FROM
THE BOTTOM OF THE WATER
RESERVOIR.
4. First remove and then wash the water
reservoir, the milk reservoir, the porta-
filter, the two filters and measuring
scoop/tamper in a mixture of mild
detergent and water. Rinse each
thoroughly and place them back into
the unit.
5. Refer to the instructions on “PLACING
THE PORTA-FILTER” section before
placing or removing the porta-filter and
any filter from the unit.
6. To clean the inside of the appliance,
follow the steps listed on the
“PREPARING CAPPUCCINO” section
using water in both reservoirs and
no ground coffee in the filter. Do not
immerse the main body of the appliance
or power cord and plug in water or
attempt to reach any of its internal parts.
IMPORTANT - PRIME THE UNIT
To prime unit, run the steam cycle by
following the steps below:
1. Fill water reservoir up to the “MAX”
line and make sure to place the water
reservoir tightly back in the unit with its
lid closed.
2. Fill the milk reservoir with water up
to the MAX level and slide the milk
reservoir back in its place. You should
feel the milk reservoir lock in place.
3. Select one of the filters (single or
double espresso) and place it in the
porta-filter for ground coffee. Place
the porta-filter in the unit ensuring it is
properly locked and place a large cup
under it. Also, make sure the tip of the
frothed milk dispensing tube is pointing
inside the cup.
4. Plug the appliance into the appropriate
outlet.
5. Turn the power button on “I”.
6. The control panel progress bar will
illuminate (Espresso heater and
Steam heater “ ”) showing the
progress. Once the progress bar is a
fully illuminated and solid light, press
the manual espresso button “ ”. The
water will flow, allow to fill a cup, then
stop by pressing the button again.
The progress bar illumination will cycle
whilst operating.
7. Dispose of the water in the cup and
place it back in the unit.
8. Press the manual froth button “ ”.
The water will flow, allow to fill a cup,
then stop by pressing the button again.
The progress bar illumination will cycle
whilst operating.
9. The control panel progress bar will
illuminate (Espresso heater and Steam
heater “ ”) will turn into a solid light.
Now your unit has been primed and is
ready to be used.
HOW TO SELECT THE RIGHT CUP
Please make sure to select your cup
according to the following chart:
NOTE:
The total amount of the beverage
can vary depending on the type of milk and
level of froth used.
BEVERAGE
SUGGESTED
CUP
Espresso
Single (1)
Double (2)
40ml
80ml
Cappuccino
Small
(1)
Large
(2)
230ml
460ml
Latte
Small
(1)
Large
(2)
400ml
550ml
