11
10
a.
b.
c.
PLACING THE PORTA-FILTER
a. Position porta-filter underneath the
brew head.
b. Position handle so that the handle
lines up with the open lock icon “ ”
on the unit and fits into the groove.
c. Then, slowly turn it to the right until
the handle is aligned with the closed
lock symbol “ ” on the unit. CAUTION
Ensure you do not accidentally press a
drinks button.
a.
c.
b.
PLACING THE CUP(S)
a. Adjust the height by inserting the
removable drip grid in the height-
adjusting slot if you are using a small
“demitasse” cup(s) to brew espresso.
b. Keep the removable drip grid on top
of the removable drip tray if you are
using a larger cup to brew cappuccino
or latte.
CAUTION:
When brewing cappuccino
or latte, please make sure to adjust the
frothing tube lever in order to position the
frothed milk dispensing tube to point inside
the cup that is being used.
c.
b.
a.
a.
b.
FOR GROUND COFFEE:
a. Fill the filter with fresh, fine ground
espresso coffee about 3mm from the
rim (
DO NOT
overfill).
b. Using the tamping part of the scoop,
push the coffee grounds downwards
as far as the tamper will go to get your
espresso grounds compact and even.
c. Clean any excess coffee from the rim
to ensure proper fit under brew head.
FOR E.S.E. (EASY SERVING
ESPRESSO) PODS
Simply place the pod in the filter for a
single shot of espresso. If there is any
loose paper from the pod sticking out from
the filter, be sure to fold it inside to ensure
a good seal when brewing.
POD
TURNING THE UNIT ON
a. Make sure unit is plugged into the
appropriate electrical outlet.
b. Turn unit on “I” using the on/off “I/O”
switch located on the right side on the
unit.
The control panel progress bar will
illuminate (Espresso heater and Steam
heater “ ”) during the heating process
and until the water and milk (if preparing
cappuccino or latte) reach the perfect
temperature. Once the progress bar is a
fully illuminated and a solid light, the unit is
ready to use.
SELECT THE FUNCTION
PREPARING ESPRESSO
a. Press the Espresso Button “ ” once
to brew a single shot. The indicator
symbol (1) will illuminate for a single
shot of espresso. The progress bar will
indicate a single shot of espresso is
brewing.
b. Press the Espresso Button “ ” twice
to brew a double shot or two single
shots of espresso. The indicator
symbol (2) will illuminate for a double
shot of espresso. the progress bar will
indicate a double shot of espresso is
brewing. For both Automatic Espresso
functions, the unit will start brewing the
espresso according to your selection.
The unit will stop automatically after
the brewing process and the progress
bar will fully illuminate in a solid light,
indicating that the cycle has been
completed. Your delicious espresso is
ready to be enjoyed!
NOTE:
If you would like to brew less
coffee than the preset serving, press
the function button at any time during
the brewing process to stop when the
desired amount of coffee is reached.
c. For manual espresso, press the
Manual Espresso Button “ ” once
to begin brewing. When you have the
desired amount of espresso, press the
Manual Espresso button once again to
stop the machine.
a.
x1
x1
b.
x2
x2
c.
