brent Corner Auger, Operator'S Manual

Page: 72 / 80

4-10
Fig. 4
251915-4
Fig. 5
270917-5
TARP INSTALLATION
251916
Fig. 2
1. Install the side board extensions to
the box. See page 1-6.
2. Assemble the end caps (24) to the
front and rear side boards with 3/8 x
3/4 flange screws and nuts (37).
Fasten to right and left side boards
with 1/4 x 1 self-threading screws
(36) See Fig. 2.
Fig. 1
4. Insert the bows (23) into the slots in
the left side board. Retain with
3/8 x 1" flange screw (29) and flange
nut (30). See Fig. 4.
251915-2
Fig. 3
251915-3
3. Assemble the bow brackets (22) to
the right side panel or side board with
3/8 x 3/4" flange screws (31) and
flange nuts (30). See Fig. 3.
5. Position the bows under the right side
brackets (22) and retain with 3/8 x 1
carriage bolts (32), flatwashers (33),
lockwashers (34) and nuts (35). See
Fig. 5.