3-5
To Select Gross Mode:
GROSS
mode displays the weight
change since the unit was last ZERO/
BALANCED.
1.
Press
[NET / GROSS]
.
or
2.
If in Gross mode, press
[
NET / GROSS
].
The [
NET / GROSS
] key is an alternat-
ing action key. If the scale is in the
GROSS
mode, pressing the [
NET /
GROSS
] key will place it in the
NET
mode. If the scale is in the
NET
mode,
pressing the [
NET / GROSS
] key will
place it in the GROSS mode.
If the
"TARE"
function has not been
previously performed, the unit will stay
in the Gross mode and the message
"FOR NET MODE PRESS TARE"
will
scroll across the display.
NOTE: The scale is in
NET
mode if
there is a flashing arrow pointing
toward the NET text just above the
[
TARE
] key.
NOTE: The scale is in
GROSS
mode
if there is a flashing arrow pointing
toward the GROSS text just above the
[NET / GROSS]
key.
To Select Net Mode:
Net mode displays the weight change
after a
TARE
has been performed.
TARE
is a temporary "zero" or refer-
ence point.
To Print
Scale data can be sent to the optional
printer by pressing the [PRINT] key.
The printer connector on the bottom of
the indicator is also used to connect
the optional downloader module
memory converter. See page 3-9.
1.
Press
"TARE"
to set a temporary
"zero" point and enter the
NET
mode.
• 04-01-02
9850
0
3150
Summary of Contents for Corner Auger
