Fig.40
®
The drive shaft assembly is installed.
9.4.3
Assemble the planetary gear
At the head of each spindle (15) on one side a smooth contact surface is located.
These contact surfaces must be fitted to the top of the carrier unit so that the
spindles and planetary gears are aligned correctly before installing the retaining
ring.
Carry out the following steps:
1.
Insert the planetary gear bushings (34) into the planetary gears.
Fig.41
2.
Mount the planetary gears (32/33) and spindles (15) so that the flat sides of
the spindle heads (A) are fitted to the top of the carrier unit.
Maintenance
Installation
430BAL011762EN_2
28.05.2018
47