Fig.19
®
The lock washer is removed.
Remove retaining plate and shaft
Perform the following steps:
1.
Remove the 4 cylinder screws (25) and removed the retaining plate (9) from
the driven shaft (8).
Fig.20
2.
Remove driven shaft (8) and thrust washer (28). No tools are required for this.
Remove the feather key (29) from the shaft if it is damaged.
Fig.21
®
The retaining plate and shaft are removed.
Loosen the set screw
Perform the following steps:
1.
Loosen the set screw (26) with a 2.5 mm allen key.
®
Cyclone/Twister/Typhoon/Tempest/Tornado: The set screw (26) can be
found on the upper/middle of the lower body (2)
Maintenance
Disassembly
430BAL011762EN_2
28.05.2018
39
