![background image](http://html1.mh-extra.com/html/breas/isleep-20/isleep-20_manual_2806358036.webp)
36 Setting up the iSleep 20
iSleep 20 clinician’s manual
Doc. 003923 En-Us V-2
The Ramp Function
Humidifier (optional)
Setting range: 5 to 60 min.
Resolution: 5 min.
Navigate to the “Ramp” section. The
ramp function can only be activated
during operation.
When the “Ramp” section is available
in the menu, the ramp function can be
activated and deactivated by pressing
and holding the “Ramp” button until
the ramp symbol appears/dissap-
pears.
Ramp pressure: 4 cmH
2
O to CPAP.
Resolution: 0.5 cmH
2
O.
The first time the ramp function is activated, the iSleep 20 will immediately start
the ramp. The following activations in the same treatment session will have a 10
second delay before starting the ramp function. This is indicated by flashing the
ramp time.
Setting range: 1 to 9, Off (where 9 is
the maximum humidity).
Navigate to the humidifier section by
using the function button. If the
HA 01 humidifier is not attached to
the iSleep 20, the “Humidity” section
will not be available in the menu.
When the humidifier icon flashes,
press the “+” button. Set the humid-
ity level using the “+” and “-“ but-
tons. Save the setting by pressing the
function button.
The HA 01 humidifier can only be activated during operation.