27
Using the iSleep 20
iSleep 20 clinician’s manual
Doc. 003923 En-Us V-2
5.4 Transferring Data between the iSleep 20 and a PC
Data Cable
iCom Communication Unit
In order to view and present patient data correctly, the Breas iSleep PC Software
must be installed on the PC.
The iSleep 20 records AHI (Apnea Hypopnea Index).
Instructions on how to manage data in the Breas iSleep PC Software can be found
in the software help.
The data cable shall not be used for data transfer while the patient
is connected to the iSleep 20. Only a PC which complies to the IEC
60601-1 standards can be used for transferring data during treat-
ment of a patient.
The data cable can receive and send
data between the iSleep 20 and a PC.
1
Connect the data cable to the
iSleep 20. Make sure it is fitted cor-
rectly.
2
Connect the other end of the data cable to the PC with the RS232 connec-
tor.
The iCom can be used to transfer data between the iSleep 20 and a PC during
treatment of a patient. The PC does not need to comply with the IEC 60601-1
standard if the iCom is used.
With the iCom, real-time data can be
received and sent between the
iSleep 20 and a PC.
