28 Using the iSleep 20
iSleep 20 clinician’s manual
Doc. 003923 En-Us V-2
5.5 Using the integrated HA 01 Humidifier
The HA 01 humidifier is intended to humidify the patient air. The
HA 01 humidifier must be installed in order to access and navigate to this set-
ting, both clinical and home mode.
A full HA 01 humidifier will be able to humidify the air for about 11 hours with
the following settings and conditions:
1
Connect the iSleep-iCom data
cable to the iSleep 20. Make sure it is
fitted correctly.
2
Connect the other end of the iSleep-iCom data cable to the iCom.
3
Connect the iCom-PC data cable between the iCom and a PC. Only use
either the D-sub cable or the USB cable.
Read the chapter “Usage of the HA 01 Humidifier” on page 13
carefully to make sure all conditions are fulfilled and considered.
See chapter “Humidifier (optional)” on page 36 for instructions how to set up the
HA 01 humidifier.
Instructions about safety, warnings, product description, using, cleaning and tech-
nical information can be found in the Breas HA 01 humidifier User Manual.
If the HA 01 humidifier is refilled according to instructions after usage, the
iSleep 20 will remember the humidity setting used.
S
ETTING
V
ALUE
Humidifier setting
5
CPAP pressure
10 cmH
2
O
Ambient temperature
68°F (20°C)
Leakage
20 l/min
Altitude
Sea level
