50
BRAVE Steel
–
User and service manual
of this parameter
w=1
condition switching over DIP switch 3 and 4 to "on". Off -
w=0
.
Parameter Value Meaning
Basic
65
z
Acoustic signals for switching on a relay
(0/1)
0
The signal for switching on a relay is standard,
z=0
. However, it is possible to use
this function when using a uni-directional supply 12V, so when the door lock is
open there is
no
buzzing so the person at the door won‟t know the door is open.
When set to
z=1
the time the relay is switched (door open) then there is a
specific sound.
Note1
This function is available only for regimes
m=1
and
m=5
Note2
During the relay switch-on (2 impulses) there is acoustic signal for the
whole time of the sequence (even during gap between impulses).
Suppression of the reception DTMF from the microphone is off as a default
i=0
.
It is possible to open the door with a personal dialler without disturbing a person
inside the building. For higher security it is possible to switch on the suppression
function
i=1
and
stop a person with an unauthorised copy of the DTMF code from
entering.
This function is turned
off
as standard
b=0
. By switching on this function
b=1
the
acoustic signal for an empty memory is cancelled, so after pressing a button with
an empty memory there is only a beep (confirmation) and a call is activated as if
there were a number.
Warning:
During the first 10 seconds of a call the tone detector is inactive (there
is a pause before the switchboard responds or number dialling by the
switchboard).
Parameter
Value Meaning
Basic
66
i
Suppression of the reception DTMF from the
microphone (0/1)
0
Parameter
Value Meaning
Basic
67
b
Baby Call
– call without the need to
programme a telephone number (0/1)
0
