BRAVE Steel
–
User and service manual 49
5.5 System parameters
Parameter
Value
Meaning
Basic
61
z
Acoustic signals (confirmation, error,empty
memory, end of call) (0/1)
1
The Brave‟s comes with standard acoustic signals. However, using parameter
“
z”
it is possible to switch off the acoustic signals. The values are:
z=0 Acoustic signals
off
; and
z=1 Acoustic signals
on
.
Parameter
Value
Meaning
Basic
62
v
Acoustic signals introduction/conclusion
(0/1/2)
1
The acoustic signals for the connection and disconnection of a line are standard,
but this may cause false choices with some phone systems. So using parameter
“
v”
it is possible to switch off these signals. The values required are:
z=0 Introduction/conclusion signalisation is off;
z=1 Pick up and disconnection signalisation on (intro/concl.- type1);
z=2 Pick up and disconnection signalisation on (intro/concl.- type2).
Parameter
Value
Meaning
Basic
63
u
Acoustic ticking signal during a call
(0/1)
0
Ticking during a call is switched off as standard. However, by switching it on you
can differentiate on the switchboard a call from the Brave by a faint ticking. The
values are:
u=0 Ticking into a call is off
u=1 Ticking into a call is on
Parameter
Value
Meaning
Basic
64
w
Internal power supply from connected
supply 12V (DIP 3,4) (0/1)
0
For version
(C)
only.
The external power supply is turned off as standard.
You only need to turn this function on if the Brave is supposed to operate
functions when at rest (i.e. relay control). Relay in regime
m=7
enables
permanent switch-on even after call disconnection, regime
m=8
enables
switch-on depending on the Day/Nigh setting even after call disconnection. In
these cases it is necessary to connect an internal power supply so that there is
no current flowing through the Brave when the system is at rest. Switching on
