16
BRAVE Steel
–
User and service manual
Module
BSC-mod4
has 4 buttons
and
contains
the
electronics
for
connection to the basic module, or to a
BSC-mod4/BSKey. This module is
connected with a flat cable
– the buttons
and back lighting are already connected.
On the module there are also terminals
for connecting 4 additional buttons as well
as the power supply for the name tag
back
lighting (following
BSM-mod4).
Module
BSM-mod4
is always connected
to the previous (i.e. in line from the basic
module) BSC-mod4. The connection is
not prepared and it will be necessary to
connect it with conductors
– see Pic.2.
Connections with flat cables are made
easier by the connector locks, which
prevent turning, but the connectors are
directional
– "To basic module" is the
direction to the basic module, "To expand
module" is the direction to the end of line
(on last BSC-mod4 / BSKey).
Pic.3 shows the position of the
keyboard place. In this example the
keyboard BSKey is connected in second
place (there are 2 cables between the
keyboard and basic module).
Pic.3 also shows the position of the
button
module
with
a
keyboard
connected. The number of buttons on the
basic module is set with parameter
6#
–
see page 49.
Pic. 3 Interconnecting of modules Brave Steel
