Page 15
Base Plate
External Tooth Star Washers
Eight 3/8" external tooth star washers are supplied
with each lift. Position star washers as follows.
Through Floor Only:
When base plate mounting
holes penetrate the floor only, position a star washer
between the floor and the 2-1/2" diameter body
washer as shown below.
Through Reinforcement Brackets:
When rein-
forcement bars are used, position the star washer
between the chassis and the bar (see Figure L).
Through Chassis:
When securing base plate
mounting bolts through chassis subframe members,
position a star washer between the chassis and the
3/8" diameter flat washer (see Figure L).
Note:
Body washers are not required when
underfloor brackets are used or bolts penetrate
chassis subframe members.
Star Washer
2-1/2" Body Washer
Through Floor Only:
Position star washer
between floor and 2-1/2"
diameter body washer.
Star Washer
3/8" Lock Washer
3/8" Flat Washer
3/8" Hex Nut
Through Chassis:
Position star washer
between chassis and
3/8" diameter flat washer.
Star Washers
Through Reinforcement
Brackets:
Position star
washer between chassis
bracket.
3/8" Flat Washer
3/8" Lock Washer
3/8" Hex Nut
Bolt Tightening
Details on page 16.
Figure L
Lift Installation Instructions
3/8" Lock Washer
3/8" Flat Washer
3/8" Hex Nut
