CAUTION
Battery Cover
Rubber Cover
Screw
Battery Cover
Battery Cover
23
Changing Batteries
Prepare small screwdrivers (Phillips, flathead).
1. Turn off the power of the motor handpiece.
2. Remove the rubber cover from the battery
cover with a thin flathead screwdriver.
(Fig. 13)
3. Remove the screw fixing the battery cover
with a Phillips screwdriver. (Fig. 14)
4. Remove the battery cover by sliding it toward
the charging terminal. (Fig. 15)
5. Remove old batteries.
6. Insert new batteries according to the polarity
marking in the battery box. A mix-up between
the plus and minus sides will not allow
operation of the handpiece.
7. Attach the battery cover.
8. Tighten the screw with a Phillips screwdriver.
Do not overtighten it.
9. Insert the rubber cover back into the screw
hole of the battery cover in the originally
inserted direction.
Changing of batteries is now completed. Charge
them fully before use.
• Do not misplace the rubber cover and screw.
• The used nickel metal hydride batteries are recyclable, but their disposal may
sometimes not be permitted by local laws.
Fig. 13
Fig. 14
Fig. 15
Summary of Contents for EndoSequence II
Page 1: ...OPERATION MANUAL OM ER436E Cordless Handpiece...
Page 28: ......
