WARNING
Power Cord Jack
Inlet
Power Lamp
Power Switch
13
(1) Charging Batteries
1. Insert the Power Cord Jack into the inlet at the back of the Battery Charger. (Fig. 4)
2. Insert the Power Cord and Plug in. Make sure you have the correct voltage.
3. Turn on the Power Switch. At this time, check that the power lamp lights up. (Fig. 5)
4. Insert the motor handpiece into the Battery Charger. Charging starts with the charge mark
flashing on LCD screen.
5. When the alarm sounds and “ ” is displayed on the LCD panel, charging is completed.
5. Operations
When the alarm does not sound and the charging animation is not displayed despite
batteries being replaced with new ones, immediately stop using and contact Brasseler
USA. (Refer to Changing Batteries)
Fig. 5
Fig. 4
Summary of Contents for EndoSequence II
Page 1: ...OPERATION MANUAL OM ER436E Cordless Handpiece...
Page 28: ......
