101
GB
In this section, we explain how you can rectify these problems very easily.
Your machine automatically detects certain operating faults and informs you of these by
means of the indicator lights, which light up red, or by means of particular messages on the
display.
Problems that you can rectify yourself
Messages
Problems requiring a service engineer
Causes / Remedies
The pump filter is blocked.
Clean the pump filter (see the section on "CLEANING
THE FILTERS" for how to do this) and then press the "Start/Pause" button I->
again to restart the cycle.Also check the drain hose's position in the drain pipe:
the connection should not be airtight (see the section on "CONNECTING YOUR
MACHINE: Draining away the waste water").
The water tap is closed.
Check whether the tap is open and then press the
"Start/Pause" button I-> again to restart the cycle. This incident can also be
caused by the drain hose being connected improperly (see the section on
"CONNECTING YOUR MACHINE: Draining away the waste water").
Too much detergent.
The machine automatically initiates an extra rinse. Check
the amount of detergent you use on your next wash.
The door is not closed properly.
Check that the door is closed properly and
then press the "Start/Pause" button I-> again to restart the cycle.
"Tap closed" light
lit
Foam detection light
lit
Check that the message displayed does not correspond to a problem that you can rectify
yourself (see above)..
Your machine also detects some faults that necessarily require rectification by a service engineer
and indicates this by other messages, of which we provide some examples below.
If you encounter one of these messages, remember to note down the message displayed so that you
can tell your service engineer when you call him to help him in his task.
Messages
etc...
After-Sales Service
Any work on your machine must be performed by your dealer or some other service engineer
approved by the manufacturer.
When you call, mention your machine's full reference (model, type and serial number).
This information is given on the identification plate.
