91
GB
Programming
Spin speed, Hold and Rinse, No spin
Time setting,
For delayed end,
For current time
Cycle progress
Display
3
3
A
A
R
R
5
5
C
C
4
4
2
2
B
B
All the buttons are sensitive. They do not stay pushed in. We recommend that you only use a brief press.
You should only press the "Start/Pause" button briefly unless cancelling a programme*, in
which case you should hold the button down.
(*) Details of this function in the following pages.
If one of the cycle progress lights
is lit when you switch on, hold down "Cancel" before
you do anything else.
Warning:
switching to the "Stop" position cannot cancel a programme.
B
B
Setting the current time
You set the Current Time function
by holding down the
and
buttons
simultaneously for at least 3 seconds and then setting the time with the
button (your machine
records your setting automatically).
- By turning the knob slowly you can fine-tune minute by minute,
- By turning the knob rapidly, you can set in 5-minute intervals. You can turn the knob in either direction.
R
R
Start/Pause: short press
Cancel: long press
For more details of the various functions, please refer to the section on "DETAILS OF THE
FUNCTIONS".
Important:
if you have stopped your machine during a washing cycle by selecting the "Stop"
position or after a power failure, when the machine is switched on again, the washing cycle
automatically returns to the point at which it was interrupted.
Stop, Type of items and Special programmes
Options: Pre-wash, Intensive, Extra rinse, Anti-crease
1
1
Safety systems display: Tap closed, Foam detected, Child safety
Selection: Child safety, Current time
